IR Emitter Extender Extension Cable 3.5mm Jack Remote Control Extender Infrared Transmitter Wire Cord

Name: IR Emitter Extender Extension Cable 3.5mm Jack Remote Control Extender Infrared Transmitter Wire Cord
Rating: 4.6 (92 reviews)

Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc.

选择规格数量

请勾选您要的商品信息！

产品详情

Brand	Rocfly
Connector Type	Auxiliary
Cable Type	AUX, Component
Recommended Uses For Product	Extending the range or changing the direction of infrared signals for various devices
Color	Red

About this item

Product: IR Emitter Extension Cable; Jack: 3.5mm; Total Length: 3meters/9.8feet; Emission Angle: +/- 45°
Works with all 38-56kHz IR remote control and devices with an IR input port.
Low current drive, low power consumption, long launch distance, small size installed.
Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc.
Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control.

Instructions for use:

Insert the product plug into the interface of the infrared forwarding device. Generally, the interface has an interface similar to the transmitting signal such as IR OUT, IR TX, IR EMITTER.
Paste the infrared emitter head at the appropriate position on the panel of the controlled device. The correct position will affect the remote control sensitivity. Generally, look for the dark red translucent panel of the controlled device. Some devices will indicate the R, IR, INF and other characters. You can also use the flashlight to illuminate the panel to see if there are any components in the red box. This component is an infrared receiver tube.

Specification:

Product Name: Infrared Emitter Cable
Feature: with 2 head
Total Length:3 meters/9.8feet
Jack:DC3.5mm
Material: Plastic, Metal
Head Size:15 x 8 x 5mm / 0.59 x 0.31 x 0.2inch (L*W*H)

Detecting Angle +/-45°:

The emission angle is +/- 45°
Less than 4 Inch distance from the infrared receiver tube of your device to the emitter is better for the sensitivity.
Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control
.

Item Specification:

Feature:
Passes IR communication: Used with an IR Repeater kit to control a device; Extend remote control ability to any room in the house
Sticks directly onto the AV equipment; Three emitters on a single plug; Adhesive backing allows the emitter to be attached to the IR eye of a device
Quad Heads allow you to control multiple pieces of equipment with only one IR output; For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers
The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug
Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal
It connects using a 3.5mm jack (similar to a pair of standard headphones)
It is an IR transmitter, not a receiver
Two conductors on the the 3.5 mm jack
Length: 10 Feet
XBox One installation:
You can install this IR extension cable with Xbox One in a few simple steps:
1. Connect your IR extension cable to the IR port on the back of the Xbox One
2. Position the emitters near the devices you want to control. These may be designed to fit under the device near the IR window, or they may be sticky and adhere directly to the IR window
3. Test to make sure you can control the device. Reposition the emitters if necessary

Package Includes:

1 x Infrared Remote Control Extender Emitter Cable

暂无评价

下一个 : IR Receiver Extender, Universal IR Repeater with 3.5mm Plug, Infrared Remote Blaster Emitter for 38 to 56kHz AV Equipment STB Boxes